#-------------------[ dmesg ] -----------------------#

<6>[    0.000000] Initializing cgroup subsys cpu
<5>[    0.000000] Linux version 3.0.36+ (builder@linux-build-6) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1-glassedge.0 SMP PREEMPT Fri Sep 25 08:22:24 MDT 2020
<4>[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c5387d
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
<4>[    0.000000] Machine: RK30board
<4>[    0.000000] ddr size = 1024 M, set ion_reserve_size size to 125829120
<6>[    0.000000] memory reserve: Memory(base:0x98800000 size:120M) reserved for <ion>
<6>[    0.000000] memory reserve: Memory(base:0x97c00000 size:12M) reserved for <fb0 buf>
<6>[    0.000000] memory reserve: Memory(base:0x97600000 size:6M) reserved for <camera_ipp_mem>
<6>[    0.000000] memory reserve: Total reserved 138M
<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[    0.000000] bootconsole [earlycon0] enabled
<4>[    0.000000] CPU SRAM: copied sram code from c0c6f000 to fef00100 - fef02158
<4>[    0.000000] CPU SRAM: copied sram data from c0c71058 to fef02158 - fef028d0
<4>[    0.000000] sram_log:      4q ?&     :     4q ?)     !?, # 0q    *!  ! 3q   @      3q 
<4>[    0.000000] CLKDATA_MSG: pll_flag = 0x00
<6>[    0.000000] L310 cache controller enabled
<6>[    0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
<4>[    0.000000] DDR DEBUG: version 1.00 20131106 
<4>[    0.000000] DDR DEBUG: DDR3 Device
<4>[    0.000000] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
<4>[    0.000000] DDR DEBUG: init success!!! freq=300MHz
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=2 extra clock, DGPS=180
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=2 extra clock, DGPS=180
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=2 extra clock, DGPS=180
<4>[    0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=2 extra clock, DGPS=180
<4>[    0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
<4>[    0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
<4>[    0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
<7>[    0.000000] On node 0 totalpages: 226816
<7>[    0.000000] free_area_init_node: node 0, pgdat c0c6d060, node_mem_map c1724000
<7>[    0.000000]   Normal zone: 976 pages used for memmap
<7>[    0.000000]   Normal zone: 0 pages reserved
<7>[    0.000000]   Normal zone: 123952 pages, LIFO batch:31
<7>[    0.000000]   HighMem zone: 1072 pages used for memmap
<7>[    0.000000]   HighMem zone: 100816 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 7 pages/cpu @c1f2d000 s7040 r8192 d13440 u32768
<7>[    0.000000] pcpu-alloc: s7040 r8192 d13440 u32768 alloc=8*4096
<7>[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 224768
<5>[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00150000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00006000@0x00004000(kernel),0x00006000@0x0000a000(boot),0x00010000@0x00010000(recovery),0x00020000@0x00020000(backup),0x00200000@0x00040000(cache),0x00500000@0x00240000(userdata),0x00002000@0x00740000(metadata),0x00002000@0x00742000(kpanic),0x00200000@0x00744000(system),-@0x00944000(user) bootver=2013-12-27#2.10 firmware_ver=4.4.2
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] allocated 4194304 bytes of page_cgroup
<6>[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
<6>[    0.000000] Memory: 886MB = 886MB total
<5>[    0.000000] Memory: 873468k/873468k available, 175108k reserved, 407552K highmem
<5>[    0.000000] Virtual kernel memory layout:
<5>[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
<5>[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
<5>[    0.000000]     DMA     : 0xff600000 - 0xffe00000   (   8 MB)
<5>[    0.000000]     vmalloc : 0xdf000000 - 0xfe800000   ( 504 MB)
<5>[    0.000000]     lowmem  : 0xc0000000 - 0xde800000   ( 488 MB)
<5>[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
<5>[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
<5>[    0.000000]       .init : 0xc0408000 - 0xc0439000   ( 196 kB)
<5>[    0.000000]       .text : 0xc0439000 - 0xc0bfc164   (7949 kB)
<5>[    0.000000]       .data : 0xc0bfe000 - 0xc0c6eec8   ( 452 kB)
<5>[    0.000000]        .bss : 0xc0c72024 - 0xc17239e8   (10951 kB)
<6>[    0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
<6>[    0.000000] Preemptible hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:352
<4>[    0.000000] rk30_gpio_init: 128 gpio irqs in 4 banks
<6>[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
<4>[    0.000000] rk_timer: version 1.3
<6>[    0.003755] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
<6>[    0.012923] pid_max: default: 32768 minimum: 301
<6>[    0.018200] Security Framework initialized
<6>[    0.022790] SELinux:  Initializing.
<7>[    0.026729] SELinux:  Starting in permissive mode
<6>[    0.026794] Mount-cache hash table entries: 512
<6>[    0.032378] Initializing cgroup subsys debug
<6>[    0.037157] Initializing cgroup subsys cpuacct
<6>[    0.042147] Initializing cgroup subsys memory
<6>[    0.047035] Initializing cgroup subsys freezer
<6>[    0.052026] CPU: Testing write buffer coherency: ok
<4>[    0.138214] CPU1: Booted secondary processor
<4>[    0.178208] CPU2: Booted secondary processor
<4>[    0.218205] CPU3: Booted secondary processor
<6>[    0.218240] Brought up 4 CPUs
<6>[    0.235905] SMP: Total of 4 processors activated (6525.87 BogoMIPS).
<6>[    0.243316] devtmpfs: initialized
<6>[    0.252909] NET: Registered protocol family 16
<6>[    0.257989] last_log: 0xde100000 map to 0xdf004000 and copy to 0xc0c761c0 (version 2.1)
<4>[    0.387655] Board ID: 8 (0b1000)
<4>[    0.391308] Device type is: glassedge7
<4>[    0.395530] HW Rev is: 2
<4>[    0.398436] DVFS MSG:	AVS Value(index=0): 198 192 194 196 193 196 198 196 194 193 
<6>[    0.417772] lcdc0 is used as primary display device contoller!
<6>[    0.424297] warning:lcdc1 not add to system!
<6>[    0.529295] rk29sdk_wifi_bt_gpio_control_init: init finished
<6>[    0.536852] console [ttyFIQ0] enabled, bootconsole disabled
<6>[    0.546019] Registered FIQ tty driver de035cc0
<6>[    0.546514] Loaded driver for PL330 DMAC-1 rk29-pl330
<6>[    0.546556] 	DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
<6>[    0.546745] Loaded driver for PL330 DMAC-2 rk29-pl330
<6>[    0.546787] 	DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
<6>[    0.578716] bio: create slab <bio-0> at 0
<5>[    0.583114] SCSI subsystem initialized
<6>[    0.583319] usbcore: registered new interface driver usbfs
<6>[    0.583430] usbcore: registered new interface driver hub
<6>[    0.597687] usbcore: registered new device driver usb
<6>[    0.597930] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
<6>[    0.598181] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
<6>[    0.598374] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
<6>[    0.598507] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
<6>[    0.598694] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
<6>[    0.629276] rk30-adc rk30-adc: rk30 adc: driver initialized
<4>[    0.801602] lower power .....
<6>[    0.804602] rk30_adc_battery: driver initialized
<4>[    0.809431] timed-gpio: probe of timed-gpio failed with error -22
<6>[    0.815643] Advanced Linux Sound Architecture Driver Version 1.0.24.
<6>[    0.822450] Bluetooth: Core ver 2.16
<6>[    0.826138] NET: Registered protocol family 31
<6>[    0.830618] Bluetooth: HCI device and connection manager initialized
<6>[    0.837013] Bluetooth: HCI socket layer initialized
<6>[    0.841924] Bluetooth: L2CAP socket layer initialized
<6>[    0.847029] Bluetooth: SCO socket layer initialized
<6>[    0.852131] cfg80211: Calling CRDA to update world regulatory domain
<4>[    0.859360] rk fb probe ok!
<4>[    0.867052] act8846_set_init,line=17
<4>[    0.867087] act8846_set_init:g_pmic_type=3
<4>[    0.868887] act8846_set_init  act_dcdc1 =1200000mV end
<4>[    0.870765] act8846_set_init  vdd_core =1000000mV end
<4>[    0.872640] act8846_set_init  vdd_cpu =1000000mV end
<4>[    0.874516] act8846_set_init  act_dcdc4 =3300000mV end
<4>[    0.875760] act8846_set_init  act_ldo1 =1000000mV end
<4>[    0.877534] act8846_set_init  act_ldo2 =1200000mV end
<4>[    0.879310] act8846_set_init  act_ldo3 =1800000mV end
<4>[    0.881086] act8846_set_init  act_ldo4 =3300000mV end
<4>[    0.882859] act8846_set_init  act_ldo5 =3300000mV end
<4>[    0.884635] act8846_set_init  act_ldo6 =1800000mV end
<4>[    0.885774] act8846_set_init  act_ldo7 =1800000mV end
<4>[    0.887547] act8846_set_init  act_ldo8 =3300000mV end
<4>[    0.887593] act8846_set_init,line=78 END
<4>[    0.887672] i2c-core: driver [act8846] using legacy suspend method
<4>[    0.887719] i2c-core: driver [act8846] using legacy resume method
<6>[    0.887788] Switching to clocksource rk_timer
<6>[    0.888247] Switched to NOHz mode on CPU #3
<6>[    0.888259] Switched to NOHz mode on CPU #1
<6>[    0.888273] Switched to NOHz mode on CPU #2
<4>[    0.896523] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xdf0ac000
<6>[    0.897663] Switched to NOHz mode on CPU #0
<4>[    1.087901] fb0:win0
<4>[    1.087906] fb1:win1
<4>[    1.087911] fb2:win2
<4>[    1.088084] rk3188 lcdc0 clk enable...
<4>[    1.152957] rk3188 lcdc0 clk disable...
<4>[    1.177619] fb0:phy:97c00000>>vir:e0000000>>len:0xc00000
<4>[    1.177909] rk_fb_register>>>>>fb0
<4>[    1.186620] rk_fb_register>>>>>fb1
<4>[    1.186736] rk3188 lcdc0 clk enable...
<4>[    1.186779] lcdc0: dclk:64000000>>fps:55 
<6>[    1.186814] rk30-lcdc rk30-lcdc.0: rk3188_load_screen for lcdc0 ok!
<6>[    1.211908] lcdc0 wakeup from standby!
<6>[    1.211942] lcdc0 win0 open,atv layer:1
<4>[    1.212437] rk3188 lcdc0 probe ok!
<3>[    1.222951] emmc emmc: internal_storage is NOT emmc
<6>[    1.223152] NET: Registered protocol family 2
<6>[    1.223299] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[    1.223648] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
<6>[    1.224641] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
<6>[    1.225744] TCP: Hash tables configured (established 65536 bind 65536)
<6>[    1.225794] TCP reno registered
<6>[    1.225822] UDP hash table entries: 256 (order: 1, 8192 bytes)
<6>[    1.225880] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
<6>[    1.226183] NET: Registered protocol family 1
<4>[    1.226386] RK29 Backlight Driver Initialized.
<6>[    1.226622] Unpacking initramfs...
<6>[    1.294527] Freeing initrd memory: 1344K
<6>[    1.294642] PMU: registered new PMU device of type 0
<4>[    1.294759] efuse_version_val: efuse version = 51
<4>[    1.294799] DVFS MSG: core: dvfs_adjust_table_lmtvolt get leakage_level = 4000
<4>[    1.294853] efuse_version_val: efuse version = 51
<4>[    1.294890] DVFS MSG: aclk_gpu: dvfs_adjust_table_lmtvolt get leakage_level = 4000
<4>[    1.318131] rk3188 cpufreq version 2.2, suspend freq 1008 MHz
<3>[    1.318545] VPU_SERVICE: failed on clk_get pd_video
<3>[    1.318605] VPU_SERVICE: failed on clk_get aclk_ddr_vepu
<3>[    1.318651] VPU_SERVICE: failed on clk_get hclk_cpu_vcodec
<4>[    1.318701] vpu: power on
<6>[    1.318763] VPU_SERVICE: checking hw id 4831
<4>[    1.356082] vpu: power off...done
<6>[    1.356135] VPU_SERVICE: init success
<6>[    1.356435] audit: initializing netlink socket (disabled)
<5>[    1.356506] type=2000 audit(1.290:1): initialized
<4>[    1.373284] highmem bounce pool size: 64 pages
<6>[    1.373469] ashmem: initialized
<6>[    1.386017] fuse init (API version 7.16)
<7>[    1.386286] SELinux:  Registering netfilter hooks
<6>[    1.390910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
<6>[    1.390973] io scheduler noop registered
<6>[    1.391013] io scheduler deadline registered
<6>[    1.391095] io scheduler cfq registered (default)
<6>[    1.411378] rga: Driver loaded succesfully
<4>[    1.411604] rk_serial.c v1.6 2013-12-23
<6>[    1.411714] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
<6>[    1.411906] rk_serial rk_serial.0: membase 0xdf0bc000
<6>[    1.411990] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
<6>[    1.412164] rk_serial rk_serial.3: membase 0xdf0c0000
<6>[    1.412449] Rockchip ion module(version: 1.0) is successfully loaded
<6>[    1.415103] loop: module loaded
<6>[    1.415187] Android kernel panic handler initialized (bind=kpanic)
<6>[    1.415910] PPP generic driver version 2.4.2
<6>[    1.416082] PPP Deflate Compression module registered
<6>[    1.416122] PPP BSD Compression module registered
<6>[    1.428917] PPP MPPE Compression module registered
<6>[    1.428978] NET: Registered protocol family 24
<6>[    1.429030] tun: Universal TUN/TAP device driver, 1.6
<6>[    1.429080] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
<6>[    1.429493] usbcore: registered new interface driver r8152
<6>[    1.429757] usbcore: registered new interface driver asix
<6>[    1.429864] usbcore: registered new interface driver cdc_ether
<6>[    1.429972] usbcore: registered new interface driver dm9620
<6>[    1.430078] usbcore: registered new interface driver SR9700_android
<6>[    1.430208] usbcore: registered new interface driver smsc95xx
<6>[    1.430316] usbcore: registered new interface driver net1080
<6>[    1.430422] usbcore: registered new interface driver cdc_subset
<6>[    1.430528] usbcore: registered new interface driver zaurus
<6>[    1.430602] cdc_ncm: 04-Aug-2011
<6>[    1.430691] usbcore: registered new interface driver cdc_ncm
<4>[    1.430748] Rockchip WiFi SYS interface (V1.00) ... 
<6>[    1.430853] Initializing USB Mass Storage driver...
<6>[    1.430971] usbcore: registered new interface driver usb-storage
<6>[    1.431030] USB Mass Storage support registered.
<6>[    1.431239] usbcore: registered new interface driver usbserial
<6>[    1.431345] USB Serial support registered for generic
<6>[    1.431459] usbcore: registered new interface driver usbserial_generic
<6>[    1.431522] usbserial: USB Serial Driver core
<6>[    1.431610] USB Serial support registered for GSM modem (1-port)
<6>[    1.431731] usbcore: registered new interface driver option
<6>[    1.431787] option: v0.7.2:USB Driver for GSM modems
<6>[    1.644628] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
<6>[    1.644699] usb20_otg usb20_otg: DWC OTG Controller
<6>[    1.644900] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
<6>[    1.645014] usb20_otg usb20_otg: irq 48, io mem 0x00000000
<6>[    1.645070] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
<6>[    1.645210] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.645282] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.645354] usb usb1: Product: DWC OTG Controller
<6>[    1.645403] usb usb1: Manufacturer: Linux 3.0.36+ dwc_otg_hcd
<6>[    1.645461] usb usb1: SerialNumber: usb20_otg
<6>[    1.646129] hub 1-0:1.0: USB hub found
<6>[    1.646188] hub 1-0:1.0: 1 port detected
<6>[    1.649311] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xdf180000
<6>[    1.860780] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
<6>[    1.860850] usb20_host usb20_host: DWC OTG Controller
<6>[    1.860988] usb20_host usb20_host: new USB bus registered, assigned bus number 2
<6>[    1.861099] usb20_host usb20_host: irq 49, io mem 0x00000000
<6>[    1.861199] DWC_OTG: Init: Port Power? op_state=1
<6>[    1.861248] DWC_OTG: Init: Power Port (0)
<6>[    1.861360] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    1.861431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    1.861503] usb usb2: Product: DWC OTG Controller
<6>[    1.861553] usb usb2: Manufacturer: Linux 3.0.36+ host20_hcd
<6>[    1.861611] usb usb2: SerialNumber: usb20_host
<6>[    1.862266] hub 2-0:1.0: USB hub found
<6>[    1.862323] hub 2-0:1.0: 1 port detected
<6>[    1.929138] android_usb gadget: Mass Storage Function, version: 2009/09/11
<6>[    1.929214] android_usb gadget: Number of LUNs=2
<6>[    1.929275]  lun0: LUN: removable file: (no medium)
<6>[    1.929328]  lun1: LUN: removable file: (no medium)
<6>[    1.929787] android_usb gadget: android_usb ready
<6>[    1.930185] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
<6>[    1.930680] usbcore: registered new interface driver xpad
<6>[    1.930807] usbcore: registered new interface driver usb_acecad
<6>[    1.930866] acecad: v3.2:USB Acecad Flair tablet driver
<6>[    1.930981] usbcore: registered new interface driver aiptek
<6>[    1.931037] aiptek: v2.3 (May 2, 2007):Aiptek HyperPen USB Tablet Driver (Linux 2.6.x)
<6>[    1.931112] aiptek: Bryan W. Headley/Chris Atenasio/Cedric Brun/Rene van Paassen
<6>[    1.931256] usbcore: registered new interface driver gtco
<4>[    1.931310] GTCO usb driver version: 2.00.0006
<6>[    1.931419] usbcore: registered new interface driver hanwang
<6>[    1.931536] usbcore: registered new interface driver kbtab
<6>[    1.931590] kbtab: v0.0.2:USB KB Gear JamStudio Tablet driver
<6>[    1.931717] usbcore: registered new interface driver wacom
<6>[    1.931771] wacom: v1.52:USB Wacom tablet driver
<4>[    1.931877] ==gsl_ts_init==
<4>[    1.931940] GSLX680 Enter gsl_ts_probe
<4>[    1.931982] ==kzalloc success=
<6>[    2.247959] usb 2-1: new high speed USB device number 2 using usb20_host
<4>[    2.257913] [GSLX680] Enter gsl_ts_init_ts
<6>[    2.262549] input: gslX680 as /devices/platform/rk30_i2c.2/i2c-2/2-0040/input/input1
<6>[    2.459167] usb 2-1: New USB device found, idVendor=0bda, idProduct=8152
<6>[    2.459275] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
<6>[    2.459459] usb 2-1: Product: USB 10/100 LAN
<6>[    2.459522] usb 2-1: Manufacturer: Realtek
<6>[    2.459578] usb 2-1: SerialNumber: 000FFF82B940
<6>[    2.461845] cdc_ether 2-1:2.0: eth0: register 'cdc_ether' at usb-usb20_host-1, CDC Ethernet Device, 00:0f:ff:82:b9:40
<6>[    2.462731] cdc_ether 2-1:2.0: eth0: unregister 'cdc_ether' usb-usb20_host-1, CDC Ethernet Device
<4>[    2.487906] =============gsl_load_test_fw start==============
<4>[    2.609719] =============gsl_load_test_fw end==============
<6>[    2.697964] usb 2-1: reset high speed USB device number 2 using usb20_host
<6>[    2.976073] r8152 2-1:1.0: eth0: This product is covered by one or more of the following patents:
<6>[    2.976107] 		US6,570,884, US6,115,776, and US6,327,625.
<4>[    3.037902] =============gsl_load_fw start==============
<4>[    3.037961] gsl: Device type is: glassedge7
<4>[    3.038015] gsl: gsl_tp_type 1 detected, using new EST firmware...
<4>[    3.715556] =============gsl_load_fw end==============
<4>[    3.878681] ret=0
<6>[    3.882294] rtc_hym8563 1-0051: clock/calendar information is no longer guaranteed
<6>[    3.892401] using rtc device, rtc_hym8563, for alarms
<6>[    3.892512] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
<6>[    3.892675] i2c /dev entries driver
<6>[    3.894306] lirc_dev: IR Remote Control driver registered, major 250 
<6>[    3.894388] IR NEC protocol handler initialized
<6>[    3.894446] IR RC5(x) protocol handler initialized
<6>[    3.894505] IR RC6 protocol handler initialized
<6>[    3.894561] IR JVC protocol handler initialized
<6>[    3.894617] IR Sony protocol handler initialized
<6>[    3.894673] IR RC5 (streamzap) protocol handler initialized
<6>[    3.894739] IR LIRC bridge handler initialized
<6>[    3.894793] Linux video capture interface: v2.00
<4>[    3.895287] def_ref_volt: 1800mV, curr_ref_volt: 1800mV
<6>[    3.896270] device-mapper: uevent: version 1.0.3
<6>[    3.897022] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
<6>[    3.897759] Bluetooth: HCI UART driver ver 2.2
<6>[    3.897825] Bluetooth: HCI H4 protocol initialized
<6>[    3.898065] Bluetooth: HCILL protocol initialized
<6>[    3.898232] cpuidle: using governor ladder
<6>[    3.898370] cpuidle: using governor menu
<6>[    3.899212] .Line4008..The End of SDMMC-probe Ver.6.07 The last modify date is 2013-12-20.  [sdio]
<6>[    3.899400] Skipping unavailable LED gpio -1 (button-backlight)
<6>[    3.902359] usbcore: registered new interface driver usbhid
<6>[    3.902418] usbhid: USB HID core driver
<6>[    3.902646] 
<6>[    3.902653] drivers/mmc/core/core.c...2015..  ===== mmc_rescan Begin....[mmc0]
<6>[    3.903229] logger: created 256K log 'log_main'
<6>[    3.903414] logger: created 256K log 'log_events'
<6>[    3.903597] logger: created 256K log 'log_radio'
<6>[    3.903777] logger: created 256K log 'log_system'
<6>[    3.904493] zram: Created 1 device(s) ...
<6>[    3.905119] usbcore: registered new interface driver snd-usb-audio
<4>[    3.905743] i2c-core: driver [ES8323] using legacy suspend method
<4>[    3.905808] i2c-core: driver [ES8323] using legacy resume method
<6>[    3.926254] rk29_sdmmc_change_clk_div..1684..  newDiv=40, newCLK=300Khz [sdio]
<4>[    3.926454] RT3261 audio_card_init
<6>[    3.926796] Codec driver version RT3261_V1.3.0, in fact you choose rt3261 with a dsp!
<4>[    3.938949] read codec chip id is 0x6
<6>[    4.108853] DSP init success
<6>[    4.114843] DSP version code = 0x501a
<6>[    4.122501] asoc: rt3261-aif1 <-> rk29_i2s.1 mapping ok
<6>[    4.128363] asoc: rt3261-aif2 <-> rk29_i2s.1 mapping ok
<6>[    4.129589] ALSA device list:
<6>[    4.129627]   #0: RK29_RT3261
<6>[    4.129824] GACT probability NOT on
<6>[    4.129873] Mirror/redirect action on
<6>[    4.129914] u32 classifier
<6>[    4.129944]     Actions configured
<6>[    4.129982] Netfilter messages via NETLINK v0.30.
<6>[    4.130103] nf_conntrack version 0.5.0 (13668 buckets, 54672 max)
<6>[    4.130743] ctnetlink v0.93: registering with nfnetlink.
<6>[    4.130849] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
<6>[    4.130918] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
<6>[    4.131510] xt_time: kernel timezone is -0000
<6>[    4.131836] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.132166] arp_tables: (C) 2002 David S. Miller
<6>[    4.132302] TCP cubic registered
<6>[    4.132340] Initializing XFRM netlink socket
<6>[    4.133217] NET: Registered protocol family 10
<6>[    4.134534] Mobile IPv6
<6>[    4.134611] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[    4.134866] IPv6 over IPv4 tunneling driver
<6>[    4.136286] NET: Registered protocol family 17
<6>[    4.136376] NET: Registered protocol family 15
<6>[    4.136782] Bluetooth: RFCOMM TTY layer initialized
<6>[    4.136872] Bluetooth: RFCOMM socket layer initialized
<6>[    4.136927] Bluetooth: RFCOMM ver 1.11
<6>[    4.136970] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    4.137027] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    4.137264] NET: Registered protocol family 35
<6>[    4.137599] [BT_RFKILL]: Enter rfkill_rk_init
<6>[    4.137774] [BT_RFKILL]: Request irq for bt wakeup host
<6>[    4.137962] [BT_RFKILL]: ** disable irq
<6>[    4.167921] [BT_RFKILL]: bt shut off power
<6>[    4.167969] [BT_RFKILL]: ap6330 device registered.
<4>[    4.168104] 
<4>[    4.168111] sensor_mod_init..nt99141.. 
<6>[    4.168390] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
<3>[    4.168484] rk_cam_cif(3361):rk3066b-camera version: v0.3.25  Zoom by ipp
<5>[    4.168583] Registering SWP/SWPB emulation handler
<6>[    4.169508] ddrfreq: verion 3.2 20131126
<6>[    4.169556] ddrfreq: fix cpu pause bug
<6>[    4.169605] ddrfreq: normal 396MHz video 300MHz video_low 0MHz dualview 456MHz idle 0MHz suspend 198MHz reboot 300MHz
<4>[    4.170948] get cif ldo failed!
<4>[    4.170988] ret: 0
<4>[    4.172398] <<-GTP-INFO->> GTP driver installing...
<6>[    4.172716] sensor_init: Probe name sensors
<4>[    4.172788] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
<6>[    4.173464] rtc_hym8563 1-0051: setting system clock to 2011-01-01 12:00:00 UTC (1293883200)
<6>[    4.173877] Freeing init memory: 196K
<6>[    4.190091] ddrfreq: change freq to 396 MHz when normal
<4>[    4.198732] get cif ldo failed!
<4>[    4.198771] ret: 0
<7>[    4.206592] SELinux: 512 avtab hash slots, 1317 rules.
<7>[    4.208139] SELinux: 512 avtab hash slots, 1317 rules.
<7>[    4.208185] SELinux:  1 users, 2 roles, 287 types, 1 bools, 1 sens, 1024 cats
<7>[    4.208229] SELinux:  84 classes, 1317 rules
<7>[    4.210008] SELinux:  Completing initialization.
<7>[    4.210037] SELinux:  Setting up existing superblocks.
<7>[    4.210091] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<7>[    4.210147] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
<7>[    4.210272] SELinux: initialized (dev bdev, type bdev), not configured for labeling
<7>[    4.210321] SELinux: initialized (dev proc, type proc), uses genfs_contexts
<7>[    4.210381] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    4.210444] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
<7>[    4.210844] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
<7>[    4.213201] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
<7>[    4.213252] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
<7>[    4.213296] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
<7>[    4.213354] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
<7>[    4.213419] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
<7>[    4.213553] SELinux: initialized (dev mtd_inodefs, type mtd_inodefs), not configured for labeling
<7>[    4.213602] SELinux: initialized (dev usbfs, type usbfs), not configured for labeling
<7>[    4.213659] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    4.213741] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
<4>[    4.238536] 
<4>[    4.238543] sensor_probe..drivers/media/video/nt99141.c..3821..
<4>[    4.238622] nt99141 sensor_ioctrl  cmd(2) on(0)
<4>[    4.240677] 
<4>[    4.240683]  NT99141_TEST1:  nt99141..sensor_video_probe.. 
<4>[    4.246260] 
<4>[    4.246267]  nt99141  pid = 0x1410
<4>[    4.246312] ----phm add---
<4>[    4.246345] 
<4>[    4.246351] sensor_probe..drivers/media/video/nt99141.c..3870  ret = 0 
<4>[    4.246818] 
<4>[    4.246825] nt99141..sensor_ioctl..cmd:1 
<4>[    4.246878] 
<4>[    4.246884] nt99141..sensor_deactivate.. Enter
<4>[    4.267112] wangxz2
<4>[    4.267144] nt99141 sensor_ioctrl  cmd(2) on(1)
<4>[    4.367971] get cif ldo failed!
<4>[    4.368009] ret: 0
<4>[    4.397985] Probe nt99141_front_3 success
<5>[    4.671063] type=1403 audit(1293883200.990:2): policy loaded auid=4294967295 ses=4294967295
<4>[    4.671726] SELinux: Loaded policy from /sepolicy
<5>[    4.678061] type=1404 audit(1293883201.000:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
<3>[    6.758916] init: could not import file '/init.usbstorage.rc' from '/init.rc'
<3>[    6.759418] init: /init.control4.rc: 122: invalid option 'enabled'
<4>[    6.759817] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
<3>[    6.866741] init: /dev/hw_random not found
<6>[    6.866941] keychord: using input dev rk29-keypad for fevent
<7>[    7.068114] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    7.069024] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    7.228320] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<7>[    7.232738] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    7.234113] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    7.234696] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
<7>[    7.388206] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
<4>[    7.407765] gp_rknand_info = : 0xde28fc00
<4>[    7.408031] rk30_chip_set:1 
<4>[    7.408197] FtlInit!
<4>[    7.408273] No.1 FLASH ID:2c 64 44 4b a9 0
<4>[    7.410567] FTL version: 5.0.15 20140620
<4>[    7.704469] gBootMedia = 1 gSdmmcFwPartOffset =0!
<4>[    7.704523] rknand_buffer.c version: 4.40 20130830!
<5>[    7.704884] 11 cmdlinepart partitions found on MTD device rk29xxnand
<5>[    7.704948] Creating 11 MTD partitions on "rk29xxnand":
<5>[    7.705005] 0x000000400000-0x000000800000 : "misc"
<5>[    7.710073] 0x000000800000-0x000001400000 : "kernel"
<5>[    7.714045] 0x000001400000-0x000002000000 : "boot"
<5>[    7.716427] 0x000002000000-0x000004000000 : "recovery"
<5>[    7.718097] 0x000004000000-0x000008000000 : "backup"
<5>[    7.724756] 0x000008000000-0x000048000000 : "cache"
<5>[    7.728525] 0x000048000000-0x0000e8000000 : "userdata"
<5>[    7.738000] 0x0000e8000000-0x0000e8400000 : "metadata"
<5>[    7.740480] 0x0000e8400000-0x0000e8800000 : "kpanic"
<6>[    7.743145] apanic: Bound to mtd partition 'kpanic'
<6>[    7.743195] apanic: No panic data available
<5>[    7.746544] 0x0000e8800000-0x000128800000 : "system"
<5>[    7.750775] 0x000128800000-0x0001df400000 : "user"
<3>[    7.790179] fs_mgr: parse_link_device /dev/block/mtdblock10: in
<3>[    7.796217] fs_mgr: parse_link_device : ---- part_num = 10, path = /devices/virtual/mtd/mtd10/mtdblock10, is_emmc = 0
<3>[    7.806979] fs_mgr: parse_link_device : path = NULL
<3>[    7.811970] fs_mgr: parse_link_device : path = NULL
<6>[    7.817002] fs_mgr: ---------------resize_fs blk_dev /dev/block/mtd/by-name/system, type ext4
<6>[    7.825443] fs_mgr: Running /sbin/resize2fs on /dev/block/mtd/by-name/system
<6>[    7.832959] resize2fs: resize2fs 1.41.14 (22-Dec-2010)
<6>[    7.840224] resize2fs: The filesystem is already 262144 blocks long.  Nothing to do!
<6>[    7.840336] resize2fs: 
<6>[    7.855921] EXT4-fs (mtdblock9): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    7.856068] SELinux: initialized (dev mtdblock9, type ext4), uses xattr
<6>[    7.907950] fs_mgr: Running /sbin/e2fsck on /dev/block/mtd/by-name/system
<6>[    8.144039] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[    8.144184] e2fsck: /dev/block/mtd/by-name/system has filesystem last checked time in the future, check forced.
<6>[    8.144287] e2fsck: Pass 1: Checking inodes, blocks, and sizes
<6>[    8.144351] e2fsck: Pass 2: Checking directory structure
<6>[    8.144408] e2fsck: Pass 3: Checking directory connectivity
<6>[    8.144467] e2fsck: Pass 4: Checking reference counts
<6>[    8.144523] e2fsck: Pass 5: Checking group summary information
<6>[    8.144586] e2fsck: /dev/block/mtd/by-name/system: 2145/65536 files (0.4% non-contiguous), 125925/262144 blocks
<6>[    8.165725] EXT4-fs (mtdblock9): mounted filesystem with ordered data mode. Opts: auto_da_alloc,discard
<7>[    8.165840] SELinux: initialized (dev mtdblock9, type ext4), uses xattr
<6>[    8.197346] EXT4-fs (mtdblock5): recovery complete
<6>[    8.197593] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[    8.197713] SELinux: initialized (dev mtdblock5, type ext4), uses xattr
<6>[    8.277982] fs_mgr: Running /sbin/e2fsck on /dev/block/mtd/by-name/cache
<6>[    8.399260] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[    8.399367] e2fsck: /dev/block/mtd/by-name/cache has filesystem last checked time in the future, check forced.
<6>[    8.399467] e2fsck: Pass 1: Checking inodes, blocks, and sizes
<6>[    8.399530] e2fsck: Pass 2: Checking directory structure
<6>[    8.399587] e2fsck: Pass 3: Checking directory connectivity
<6>[    8.399646] e2fsck: Pass 4: Checking reference counts
<6>[    8.399701] e2fsck: Pass 5: Checking group summary information
<6>[    8.399765] e2fsck: /dev/block/mtd/by-name/cache: 25/65536 files (0.0% non-contiguous), 12658/262144 blocks
<6>[    8.403065] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: auto_da_alloc,discard
<7>[    8.403179] SELinux: initialized (dev mtdblock5, type ext4), uses xattr
<4>[    8.406331] EXT4-fs (mtdblock7): warning: mounting unchecked fs, running e2fsck is recommended
<6>[    8.406708] EXT4-fs (mtdblock7): mounted filesystem without journal. Opts: nomblk_io_submit,errors=remount-ro
<7>[    8.406814] SELinux: initialized (dev mtdblock7, type ext4), uses xattr
<6>[    8.537959] fs_mgr: Running /sbin/e2fsck on /dev/block/mtd/by-name/metadata
<6>[    8.560884] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[    8.560990] e2fsck: /dev/block/mtd/by-name/metadata was not cleanly unmounted, check forced.
<6>[    8.561079] e2fsck: Pass 1: Checking inodes, blocks, and sizes
<6>[    8.561143] e2fsck: Pass 2: Checking directory structure
<6>[    8.561200] e2fsck: Pass 3: Checking directory connectivity
<6>[    8.561259] e2fsck: Pass 4: Checking reference counts
<6>[    8.561314] e2fsck: Pass 5: Checking group summary information
<6>[    8.561378] e2fsck: /dev/block/mtd/by-name/metadata: 12/1024 files (0.0% non-contiguous), 44/1024 blocks
<6>[    8.561473] e2fsck: e2fsck terminated by exit(1)
<6>[    8.563049] EXT4-fs (mtdblock7): mounted filesystem without journal. Opts: auto_da_alloc,discard
<7>[    8.563155] SELinux: initialized (dev mtdblock7, type ext4), uses xattr
<4>[   10.818362] old_capacity = 0 , new_capacity =0, capacity = 0
<4>[   10.818380]   
<6>[   11.383639] EXT4-fs (mtdblock6): recovery complete
<6>[   11.384028] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
<7>[   11.384187] SELinux: initialized (dev mtdblock6, type ext4), uses xattr
<6>[   11.538295] fs_mgr: Running /sbin/e2fsck on /dev/block/mtd/by-name/userdata
<6>[   12.156220] e2fsck: e2fsck 1.41.14 (22-Dec-2010)
<6>[   12.156334] e2fsck: /dev/block/mtd/by-name/userdata has filesystem last checked time in the future, check forced.
<6>[   12.156447] e2fsck: Pass 1: Checking inodes, blocks, and sizes
<6>[   12.156509] e2fsck: Pass 2: Checking directory structure
<6>[   12.156567] e2fsck: Pass 3: Checking directory connectivity
<6>[   12.156627] e2fsck: Pass 4: Checking reference counts
<6>[   12.156682] e2fsck: Pass 5: Checking group summary information
<6>[   12.156746] e2fsck: /dev/block/mtd/by-name/userdata: 1004/163840 files (9.6% non-contiguous), 100094/655360 blocks
<6>[   12.185656] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: auto_da_alloc,discard
<7>[   12.185773] SELinux: initialized (dev mtdblock6, type ext4), uses xattr
<4>[   12.225866] UMP: Using OS memory backend, allocation limit: 536870912
<4>[   12.225960] UMP: UMP device driver -0d88e3e loaded
<4>[   12.270147] Mali: Mali400 inside of rk3188!
<4>[   12.270211] Mali: mali freq table num : 6 
<4>[   12.270258] Mali: mali freq table :Mali: 128,Mali: 198,Mali: 256,Mali: 297,Mali: 384,Mali: 594,Mali: 
<4>[   12.270397] Mali: init mali clock success 
<4>[   12.273441] Mali: Mali device driver loaded
<4>[   12.278050] rk30_mirroring: Unknown symbol video_data_to_mirroring (err 0)
<4>[   12.278182] rk30_mirroring: Unknown symbol audio_data_to_mirroring (err 0)
<4>[   12.282346] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
<4>[   12.283929] ipp irq 47
<4>[   12.285016] IPP init, version rk30-ipp 1.003
<3>[   12.366154] init: /dev/hw_random not found
<3>[   12.435177] init: ---------ap_mdm == 0
<3>[   12.435435] init: ---------ap_has_alsa == 0
<3>[   12.435733] init: ---------ap_data_only == 2
<3>[   12.436021] init: ---------ap_has_earphone == 0
<3>[   12.450482] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
<4>[   12.455748] healthd: BatteryTemperaturePath not found
<6>[   12.455935] binder: 114:114 transaction failed 29189, size 0-0
<3>[   12.460978] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
<3>[   12.461070] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
<3>[   12.461698] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
<3>[   12.678472] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
<3>[   12.678602] init: powerctl: cannot expand '${sys.powerctl}'
<3>[   12.678721] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
<3>[   12.678875] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
<3>[   12.722379] android_usb: already disabled
<3>[   12.730173] fs_mgr: parse_link_device /dev/block/mtdblock10: in
<3>[   12.730308] fs_mgr: parse_link_device : ---- part_num = 10, path = /devices/virtual/mtd/mtd10/mtdblock10, is_emmc = 0
<3>[   12.730462] fs_mgr: parse_link_device : path = NULL
<3>[   12.730557] fs_mgr: parse_link_device : path = NULL
<4>[   12.730905] rk29_sdmmc_progress_store..172.. fail to call progress_store because the host is null. 
<3>[   14.325382] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
<3>[   14.341903] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
<3>[   14.358231] init: cannot find '/system/control4/sbin/syslog-ng', disabling 'syslog'
<6>[   14.379598] DWC_OTG: dwc_otg_hcd_urb_enqueue urb->transfer_buffer address not align to 4-byte 0xdd22fe26
<4>[   15.235568] 
<4>[   15.235575] nt99141..sensor_ioctl..cmd:2 
<4>[   15.235647] 
<4>[   15.235655] nt99141..sensor_ioctl..cmd:3 
<3>[   15.235706] nt99141 sensor_ioctl cmd(0x3) is unknown !
<4>[   15.236760] 
<4>[   15.236768] nt99141..sensor_ioctl..cmd:1 
<4>[   15.236821] 
<4>[   15.236827] nt99141..sensor_deactivate.. Enter
<4>[   15.262500] wangxz2
<4>[   15.262543] nt99141 sensor_ioctrl  cmd(2) on(1)
<4>[   15.592089] rk fb use 3 buffers
<6>[   15.806527] rk30-lcdc rk30-lcdc.0: blank mode:0
<6>[   31.701596] warning: `zygote' uses 32-bit capabilities (legacy support in use)
<6>[   41.670211] request_suspend_state: wakeup (3->0) at 41612345006 (2020-09-25 14:21:04.503860253 UTC)
<4>[   42.565968] wifi_driver_write: wifi driver already rmmod
<6>[   42.787253] acc_open
<6>[   42.787312] acc_release
<7>[   43.796503] SELinux: initialized (dev mtdblock10, type vfat), uses genfs_contexts
<4>[   43.842159] avc:  denied  { set } for property=sys.vold.hasAsec scontext=u:r:vold:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
<3>[   43.842365] init: sys_prop: permission denied uid:0  name:sys.vold.hasAsec
<3>[   43.843309] init: no such service 'fuse_internal_sd'
<3>[   48.520368] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
<7>[   52.957920] eth0: no IPv6 routers present
<4>[  114.062913] get cif ldo failed!
<4>[  114.062948] ret: 0
<4>[  114.088131] get cif ldo failed!
<4>[  114.088176] ret: 0
<4>[  114.127959] 
<4>[  114.127967] nt99141..sensor_ioctl..cmd:2 
<4>[  114.128052] 
<4>[  114.128058] nt99141..sensor_ioctl..cmd:3 
<3>[  114.128109] nt99141 sensor_ioctl cmd(0x3) is unknown !
<4>[  114.128175] 
<4>[  114.128182]  NT99141_TEST1:  nt99141..sensor_init.. 
<4>[  114.128242] nt99141 sensor_ioctrl  cmd(2) on(0)
<4>[  114.135904] 
<4>[  114.135910]  nt99141  pid = 0x1410
<4>[  114.135958] wangxz1
<4>[  114.171888] 
<4>[  114.171892] nt99141..sensor_init.. icd->width = 1280.. icd->height 720
<4>[  114.185076] 
<4>[  114.185081] nt99141..sensor_ioctl..cmd:1 
<4>[  114.185140] 
<4>[  114.185144] nt99141..sensor_deactivate.. Enter
<4>[  114.205252] wangxz2
<4>[  114.205281] nt99141 sensor_ioctrl  cmd(2) on(1)
<4>[  114.307974] get cif ldo failed!
<4>[  114.308018] ret: 0
<7>[  131.227486] i2s dma info:periodsize(4096),limit(4),buffersize(16384),over(0)
<4>[  131.230102] rt3261_asrc_put
<4>[  137.606293] rt3261_asrc_put
<7>[  144.162059] i2s dma info:periodsize(4096),limit(4),buffersize(16384),over(0)
<4>[  144.165537] rt3261_asrc_put
<4>[  148.163557] rt3261_asrc_put
<7>[  226.213089] i2s dma info:periodsize(4096),limit(4),buffersize(16384),over(0)
<4>[  226.214891] rt3261_asrc_put
<4>[  232.164806] rt3261_asrc_put
<6>[  288.699057] binder: 1114:1122 refcount change on invalid ref 26
